Recent Content by Thumper

Check it out. Auto replacement part, blend door fix, Heat, AC replacement parts But I don't think you can use it. You should check though, look under the passenger side dash just to the right of the hump, if you have a motor there you may want to get one but if you have a shaft about a 1/4...

Not only have that blocked off but block off in the front of everything from left to right and top to bottom. Not much change in coolant temps at -20. Heats up a little faster is all. Heater puts out good on recirculate but the windows fog up. I think I will try flushing the core out before I...

Ya, I found that out now. I checked another 96 and a 97 both use cables. I did find a 01 that uses the motor so I don't know if all 96s and 97s have cables or what. Any way I had ordered two and they said I could send them back so all is good in that department but my heater still doesn't put...

Just got a heatertreater fix for my 96 and now can't find an actuator motor on my heater. I have a cable from the temp control that rotates a shaft that is protruding from the bottom of the heater just to the right of the transmission tunnel. Would this cable be there instead of an actuator...

I should be able to do the job on my mill. Thanks for the part #s.

Never been a fan of those straps either. I built a off road buggy out of a 1st gen truck and he is having a lot of problems wit the straps loosening on it. Put new straps in but the yoke is probably worn out now. I think I will try to modify the yoke for u bolts.

I wonder if we can get yokes that use the u-bolt instead of the strap.