Recent Content by Udaloy

Wah? Never heard that before. Which pin? Does that mean you put a switch inline with that wire and ground it when you want that feature? Or do you just permanently ground that wire?

Stock high idle feature was only available on automatic transmission equipped trucks.

Thanks for the options. I'll have to look into a boat shop. Both the stock interiors and seat shop were busts. I'll keep looking.

I've been searching for options in replacing my seat covers and the driver's side bottom cushion. I'm not finding many in the taupe color, and I'm having some places tell me their covers are for Laramie seats only. Does anyone know of a difference between Laramie trucks and the rest? Mine is...

And I lived to tell the story, crazy!! It's pretty damn hard to use an engine lift when the truck is six feet in the air. Don't worry, the lift has locks every few inches. You don't quite understand what I'm saying and you cast aspersions. Nice job. Have you replaced the pan on your truck...

I changed the oil pan without removing drive shafts or valve cover. However, I had a car lift and tall Jack stand. I lifted it, put the Jack stand under the harmonic damper, and lowered the truck until the pan cleared. You could do the same using a 4x4 block of wood cut the right length. Once...

Here was their fix.* So I brought it home and fixed it myself.* I'll have to get the right bolt with a shoulder, and replace the pos they put in there.*

So not only did this place attempt to let me drive away with no brakes, I could potentially have lost steering as well. I'll be informing Ram directly, and skipping any of the idiots around here.

This is the piece just hanging there.

Sorry for the delay. I didn't take it anywhere. As soon as I got in, the brake light was on, and the pedal went to the floor. I'm so glad my 18 year old wasn't driving, or my wife. The dealership knew the brakes were out, and were going to let me leave like that. It would have been an accident...

Hey all, I'm sitting in the dealership, waiting for the air bag recall work to be done. They said the steering linkage had a recall as well, and fixed that as well as the air bag. I go out to jump in the truck and leave, when the brake pedal goes to the floor. I just had new brakes put on it a...

This is my second year in NC, and my first time needing to get an inspection on my cars. What all is done at an inspection? What do they look for? I have three cars and my truck. Thanks.

Hi Yall, I recently moved to Union county from Ohio. I'm really loving it here.

The only helpful hint needed is don't unbolt anything like transmission mounts, etc. The engine will lift up enough to clear everything just by lifting on the crank pulley. He should just loosen the motor mount bolts, as the motor mounts are slotted (the motor mount cross bolt does not go...

I ended up buying a new pan from Rock Auto. I was afraid it was going to be cheap or made from thinner material than the original. I'm happy to report that the pan is every bit as heavy as the original. I don't know why someone would pay $475 for the OEM part, when this one has the same quality...