Search Results for Query: *

I just installed a fass ddrp lift pump on my '01 245hp truck. On start up the pressure is 20psi at idle. Is this pressure to high? Is the fass pump pressure adjustable? From what I have read, it should run about 16psi. My dash gauge is electrical and I have also checked pressure with a direct...

I would like very much to be included in the drawing. dean Jager marshall, tx -- email address removed --

I just had the nv5600 transmission rebuilt and they replaced the clutch and turned the flywheel. The new clutch pushes harder than the origional and engages too close to the floor. The clutch also grabs during engagement. What could the repair facility have done wrong? dj -- email address...

I recently installed yet another lift pump on my truck. At first it seemed to pulse when the intake heaters went on and off. However, now ot turns on and off untill the truck warms up. The pump is mounted, for some time, back by the fuel tank and I am able to hear it start and stop. I cannot...

telloott I currently have Amsol synthetic Manual Synchromesh Transmission Fluid with no additives in the transmission. dj

I have a '01 2wd truck with a nv5600 transmission. When I refilled the transmission, I was unable to get the complete nine pints of oil in the transmission. The latest TDR magazine indicated that the fluid level should be at the top of the fill hole or higher. With the transmission installed...

HAS ANYONE REPLACED THE FRONT WHEEL BEARINGS ON A TWO WHEEL DRIVE SUSPENSION? IF SO, WHERE DID YOU GET THE PARTS? wHAT SPECIAL TOOLS ARE REQUIRED? I AM GOING TO HAVE TO DO SOMETING WITH MINE SOON. IT SEEMS A WASTE OF MONEY TO THROW AWAY PERFECTLY GOOD HUBS. I WILL WELCOME ANY HELP. '01...

I am prepairing to order a cold air kit for my '01. This kit draws air from behind the cowl under the windshield. I am concerned with rain water being drawn into the engine. Has anyone had any experience with this modification? Gauges,shell,nerf bars,245hp,etc. Dean Jager -- email...

I am interested in a cold air intake system for my 2nd generation truck. The one that I am looking at is siod by psmbuick (performance system manufacturing ltd). Has anyone had any experience with this unit? They have indicated that I should experience a 2 lb. increase in boost and a drop of...

How much does this set-up increase in-cab noise? dj -- email address removed --

I am going to build a cool air intake for my '01 and have not been able to come up with a part number for a DRY paper air filter to use in it. Can anyone help me find a filter? Quad cab; Lear shell; Pac brake; Modified exhaust; Nerf bars Dean Jager -- email address removed --

I am very interested. I am havong a problem with the design and routing. I would prefer to buy a cold air intake rather than build one. Thank you for answering me. Dean -- email address removed --

I am looking for information on a cold air intake for my '01. I would like to either purchase or fabricate one. Can anyone help with plans? 01 245 hp; 6spd; club cab; shell;gauges;pac brake Dean Jager -- email address removed --

Have any of you fabricated a cold air intake similiar to the one made by Scott Dalgleishshown in issue34,page 68? I am interested in making one for my '01 ho engine. I am curious as to the improvement in mileage and power. Thank you for any info. Dean jdjager@net zero.net 01. 5, 245...

When I sit in the power drivers seat of my '01 club cab 2500 pick up it feels like the seat is turned slightly to the left. My right shoulder blade seem to hit the back of the seat before my left one does. After as little as 100 miles, my right shoulder becomes quite tired and sore. Is anyone...

Has anyone been able to find a power steering oil that matches the D. C. specs? My amsoil supplier searched through all of his literature and could not come up with the proper oil. He also called the factory and was told that the oil was made only for Chrysler. He then tried to get the oil from...

After purchasing parts from the Cummins dialer in Phoenix at a discount for 8 years, I was informed that there were no more discounts for any customer. Has anyone else run into this policy? I read somewhere of a Cummins discount club. Does anyone have any information on this? Do you know of...

Does anyone have information on adjusting the sensitivity of my cruise control? After topping a hill, my cruise control will engage and dis-engage several times while coasting down the down hill side. My truck has the a 245 hp. H. O. engine and the total electronic cruise control. When towing...

The speedometer on my 1999 Ram will not work under 30 mph. The anti skid warning light also comes on. The speed sensor in the transmission has been changed but the problem still remains. Has anyone else experienced this problem? Does anyone know how to repair the problem? Thank you Dean...

As suggested, I contacted Southwest Cummins and they said that they were aware of the problem, but they did not know the cause. I was told that several people had complained of the problem, but they felt it was more of an inconveince than a major problem. Dean Jager -- email address...