Search Results for Query: *

Not sure the pcm regulator is gone for sure, but voltage was dropping out. Battery cables looked good but I will go over them again. Need to get the batteries load tested also. They are fairly new, probably less than a year, and I have had them go dead just from the truck sitting. All winter...

Truck pulled great. Only problem was the battery gauge was showing 18+ volts for a while. I installed an adjustable voltage regulator a month ago. The volt gauge would drop to 8 sometimes, and I would have to rev it up to get it back charging. Its better, but not totally gone. This is the first...

Thanks. Had to go get it. I Wife would be real upset if I couldn't pull the camper. We have had to ,or had to many things canceled this year due to covid. This will be the first time pulling this camper, and first time pulling with this truck.

oh, and the engine hoist worked much better than the pipes on the kubota

All back together now. Thanks for the help. Bed doesn't match now but its almost rust free. Biggest problem I think was trying to get the blue ox goose neck ball out of the hitch mount.

It was like going to war to get the one side done

Thanks, I will. One, spring is totally off . Broke a carriage bolt for the air bags.

7 bolts, a couple wire connectors, fuel filler neck and tail lights . I think I had this ready to come off in less than an hour. Took longer to take my twin 102" whips and mounts off. Yes 7 bolts. The second one I took off I broke. I didn't realize that when I set the impact gun down, after the...

Thanks for the help. Just have to get that hitch out of the center of the bed also. Looks like two u bolts

I live in New York. About 90 miles north of the city. So we get to have all the salt on the roads here also.

How many bolts hold the bed on? I have a non rusted bed that has to go on anyway, so I guess its a good time. Colors don't match. But it came with the truck.

Duplicate post

No torch. Yes 1/2" air gun, not a large air supply. New Springs, shackles, front spring hangers,, spring eye bolts, u bolts and nuts. Was not going to chance the bolts not coming out the spring bushings. On the lower control arms on the front, the bolt with the adjuster on it won't come out of...

Thanks for the input guys. Have to have this thing rolling again by Thursday night, I have Sunday and Monday to so this. Grind the heads of the sring hanger bolts off? Will I be able to get my hand behind the tank to put new ones on? It figures ,the tank is full.

Anybody have any tips or tricks on replacing the rear leaf springs on a 2001 Ram 3500 dually. Seems the fuel tank is in the way of removing the front spring hanger. Broke the left spring at the rear bushing. Not loaded. Been driving it since October and then it just breaks. Bought new front and...

Track bar was loose when I got the truck in October. Put a new track bar on and yes used standard washers and they did crush.

Thanks everyone. I guess its time to upgrade. Probably a good time to get a red head steering box also?

Does somebody make a track bar with, the left side of track bar, tapered shaft with ball, a bigger tapered end. I had to put a washer on the shaft to pull it up tight. As the nut was below where the cotter pin goes through, And it wouldn't tighten up. Ran out of threads.. It came loose again.I...

Old box back on. Ps is better above idle. At idlebis a bit better. Wanders just like always. And now I found my track bar is loose . The tapered I hole that the track bar fits into on the frame I think has been opened up. I had to put washers under the nut when I put it on so it would pull up...