Search Results for Query: *

loked at the I. O. D fuse. . its ok.

took off the cluster and cleaned the two harness on the back w contact cleaner but they looks very good... w the cluster in position sometimes it illuminate and sometimes not; if I move it a bit it illuminate and function good for a while... maybe its a contact problem on its back... pins and...

i have no illumination by 1 week in my 99 2500 cluster... . its completely dark and the only lights on are the 2 turn signal arrows that are constantly on... ! even the OD OFF warning light not function. . all function properly, instruments are ok, its only the illumination. . im not very...

I put OPTRONICS ID BAR on my tailgate! pretty cheaper, 16. 99$ if I remember right. bought it from an ebay store and looks very similar to the OE on 3500s - ROB

ok, now when you bump the starter the pump does not run at all, exactly?? check fuse. check connection and check if you have electrical signal at the pump wiring with a tester(when you turn the key to on) truck wont start?

what do you mean for "the new pump worked a couple of times then quit "?? you hear a buzzz noise for many seconds and then it stops? rob

also download the BD diesel instruction for their valve bodies! very helpful. I've removed the valve body on my 47RE last weekend, done a very good and clean job! my first transmission job! rob

Dropped down the valve body today, just for cleaning, found a BROKE ACCUMULATOR SPRING in the 3-4 Acummulator Housing in the lower valve body! I think this is my problem. The broke spring has damaged a bit the piston... now looking for parts. .

I've an AutoXRay EZRead 1000 code scanner but I don't know if it works good with my cummins; No code from the OBD II. I'll see transmission codes from the obd II port?? thanks a lot for the great tech! very helpful, I'll try even this. Maybe the Valve Body needs to be cleaned? I bought my truck used...

Has anyone experience this? I'll try the last job before take the truck to the mechanic. I wanna try to cleaning it, I'll try claning the 1-2 2-3 3-4 valves. I don't know if this can help... anyone can explain me the procedure, tricks anything?? I know about difficult with the PARK ROD...

is the AUTOXRAY EZ-READ 1000 a good scanner for our 2nd gens?? I have found it at a great price. . rob

the alternator ground wire is the small wire that goes from altern. to the battery terminal, exactly?? rob

Anyone knows the PART# for this FP kit?? rob

I hope anyone can give me suggestion. . I had a problem w my 47RE, 99 2500; I have changed oil and filter and then it wont upshift, I think from 2nd to 3rd when cold! only when cold and rarely when hot; rpms goes on to 2000 and speed 40kmh but not upshift. I have changed: tried 100% synth...

Cannot find it on GENOS... I asked quadzilla. . any other suggestion? rob

Hi guys! I'm on the way of purchasing a RECON XZT gauge for my 99; I need it for PYRO BOOST and FUEL PRESSURE; I already have a TRANS gauge. It comes with all the hardware for installing?? I need other parts? I checked the QUADZILLA website and it says "the RECON can be upgraded for FUEL...

HI guys! red now this thread, I'm a new member. . I live in italy and also here there aren't many shop or store for Cummins or Dodge truck related parts... I buy my parts and accessories from the usa via internet but shipping is very high... anyone have a source here in italy? maybe an...

I have a CTD and live in Italy!! fuel price here are very very high... !

I wanna change the motor oil in mt 99 ctd... the door label says the last change go with 5W 40 oil. what type of oil is better? again 5W 40? here we have temperature rarerly below 0°C. . about 15W 40? synthetic or standard/mineral oil? thanks for help me rob

where to buy online? any store? cannot find this noise filter in the BD store... rob