Search Results for Query: *

Problem solved, (I hope) lol. well I purchased some vinyl decal material (Oracle 651) in a matte black finish. It's the same material decals are made from and should last about 5 to 7 years. So I cleaned the surface if the sticky mounding with denatured alcohol, then cut the adhesive to the...

I've been trying to level the front end with new coils, spacers and to make it easier I should remove the brake caliper so I don't damage the brake lines. My question is this, shouldn't the two smaller 13mm bolts holding the slider come off without having to remove the caliper bracket? I'm on...

Hey gang, What's the maximum lift on these front suspensions on a 2500 without causing the upper "A" arm coming in contact with the spring perch ?. I don't want to change out spindles because then I'll need to purchase new wheels with less backspace, just want to do it with new springs and or...

Absolutely right! I use 303 on everything plastic on the Toy hauler hauler and cross my fingers and hope my plastics don't disintegrate, since I have it stored out in the desert at Parker AZ. Good stuff :)

Yupp I put the 2 supplied washers and it barely catches, can't go more and still have threads to screw into. I'll give Covercraft or Geno's a call this week to see what they advise.

I've just owned this truck for a couple months now, not sure if the previous owner used Armor all or something like that. I normally don't put anything on rubber to shine it up, but I had some "Z best" non greasy rubber/plastic treatment to protect against the sun now that were hitting the warm...

Just got my seat covers from Geno's for my 07 and the 2 seats went fine. The center console is frustrating, there's no identifying marks other than "Made in Mexico" on the two halves and no instructions. I've tried fitting them both ways and seems either way either interferes with the catch on...

Just noticed on my new 2007 Ram 2500 the rubber coated trim piece right at the bottom of the window is sticky. And when I lean my arm out with the window down I end up with what looks like black grease all down the bottom side of my arm. WTH did Dodge use on these trim pieces? First I thought it...

Thanks Topzide, I have a couple calls in to Smarty Support and hoping they will call me back in the next couple days to confirm if there connection will allow me to use what I already have. :)

I didnt even know that I needed this lesson on driving my G56 lol . But my new 07 I just recently purchased has the G56 with a SBC which is kinda crazy since I drive my Dump truck with a 10 spd Road Ranger and then relax on the drive home with the G56 HaHa . Not sure if I'm hurting my Drivetrain...

Recently purchased my new 07 with the 5.9 and have already started improving where Dodge left off lol. So I removed the tripple gauge pod off my 2nd gen which had the Autometer EGT and probe and want to put it on the 07. I am also looking at a Smarty touch for this truck instead of the Edge drag...

I dont see plywood prices coming down anytime soon, maybe it's time for me to retire and not support the thieves who are profiting from these unsubstantiated material costs. I just sold my 2nd gen Dually with 210K miles on it for almost 22K. And the buyers got into a bidding war because they...

Thank you MWilson, I will check that link out.

Yeah I think your right, I was at a self serve wrecking yard over the weekend looking for parts on another build (67 nova) but went to the truck section and there were dozens of 2nd gens but no 3rd gens to pick thru.:(

I dont have all the bells and whistles so there's plenty of vacant space on the dash as you can see. Also I don't know what the previous owner had on his fingers when he would activate or deactivate the A/C compressor button but its ALL gooey and disfigured lol. Is it possible to change our just...

Yes, love the pics.

Nice! Are those rockers from K4 switches or maybe KCs? And it looks like they were the correct size to be able to snap right in the cubby tray or did it take a bit of tweaking? Thanks

Lol Food and beer good to know, someday i'm gonna get out of CA. and see what the USA looks like and Texas is on my list ! :) Yes I keep a tube of dielectric grease everywhere, It kept my 2nd Gen going for 22 years, now I'm on my 3rd Gen and will be repeating everything. But the painless fuse...

Thanks Ron, I will be talking to Geno's in the morning and will look into that Painless fuse panel. I always add backup lights on my vehicles and a separate switch, what I did on my 2nd gen I tapped into the oem purple backup wire and wired it to a switch and relay for my added LED back up...

Thanks Big Papa, yeah the second one is all taped up from the factory for some reason? Seems like a bunch of wires for each seat heater? Maybe I can pull ignition hot from one of those, I temporarily tapped into the cigarette lighter circuit for my low fuel pressure LED and piezo beeper but it...