Search Results for Query: *

Yeah, I ran out and bought a can of 134a and it is blowing cold now..... So, guess the next thing to do is hunt down the leak, have no clue how to do that though. maybe I will add another can and see how long it lasts and hopefully by then someone can help me on how to trace a leak. thanks guys...

Hi, all of a sudden the AC stopped blowing cold, checked fuses and relays and all is well. I started the engine and turned the AC on and watched the clutch, it engages for a second and then disengages, and after 5 seconds it reengages again and then disengages after a second, and so on and so...

OK, great, another good option. Let me ask you, is it all rubber hose, part steel with rubber crimped in the middle or? Also, how did you handle the bends and so forth? Here are pics of the line as well as the crack, I dunno, maybe a little brazing like was mentioned earlier? I am really out...

I may end up doing that. Called one dealer who told me a few dealers who have the part in the US and called them and all of them tell me that the one oil line they have is a 'special order'. what are they running a damn museum, if you got it just sell it, just a load of *****. thanks for the...

OK, that is another idea, can you give me any tips to tell a welder as to what type of material specifically it is or what the best way to do it is so that it will hold? thanks

I was thinking of that but the problem is that there is not enough 'meat' for the hose to go over one side of the line. The crack is right in the bend where the line comes out of the transmission and bends forward, there is enough 'meat' after the bend but not before, the part between the nut and the...

Hey John, thanks, I did search for the part that he told me:52028732ac and it appears that he has the correct part number. I am really surprised that this part is not available, at least not where I have tried. I am not sure what my next step is. thanks Sean

+1 on the Goerend, I tow a boat and fiver and just drained the fluid due to a cracked trans line, different post, and the ATF4 was still bright red after 20,000 miles! Also, the Mag Hytec plays a vital role as well, when towing the trans temp always stays nice and cool.

Yup, it is Marina del Rey, I drive right by this launch everyday to/from work but apparently all is not what it appears to be: C-Brats Online! Boating Forums for C-Dory People :: View topic - A Giant OOOOHHHPPS today

Hey, I have a cracked line, it is the one on the front of the transmission, drivers side, towards the front of the truck. It comes out of the transmission and then bends towards the front of the truck, well right in that bend it cracked and leaks, so obviously I need a new line. I called the dealer and...

Mine too took about 3-4 weeks and when I sent him an email I didn't get a response either but sure enough, that little guy showed up at my door. So, have a little patience and it will show, I still have not installed it yet, will update when I do hopefully next week.

I would like to try that, do you know where to get a new bearing, I thought I heard that they are available at a number of places, tractor supply? Is there any model number that anyone knows of? thanks

Wow, thanks for the in depth reply, much appreciated. I will print it out and take it with me back to them. Because of lack of time on my side I may have them install the Rock Solid busing for me and then go through your post and check everything again. I will definitley post a follow up...

Hey, thanks for all of the replies, they'er really appreciated! I ordered the Rock Solid Steering bushing and am going to install that when it arrives, for only 60. 00 if it doesn't fix the job I am not out a lot of cash and will then focus my attention to your suggestions. Sean

I just ordered on as I have replaced my box and tie rods due to a cab driver hitting me and am hoping that this is the last piece of the puzzle. I will post back once I have installed.

Thanks, I did install a new one last year fom Napa and the guys at the shop also said that it was in good working order. The steering after the crash still seemed solid and did not have this problem, only after the new parts were installed and actually the first night I got it from the shop it...

Thanks again, I now at least have a direction to go and will check what you indicated.

Great, thanks for help. what do you think would be the best way to do this? My weakness is steering and suspension. Also, are you aware if there is a steering wheel bushing that is easy to change? I really thought that with all of the new components it would be tighter than factory but...

Hi, yeah I have the dss brace already and have already done the reading on what you suggested but the issue is that prior to the accident my steering was like new, mostly because fo the DSS brace. So the facts are that prior to accident, perfect and tight steering, after accident and after new...

Hi, not sure how to describe it but after I took out the side of a Taxi, his fault, I had the insurance put in a new control arm and brand new factory box. I have had it back in the same suspension/alignment shop 4 times becuase of this 'loose jiggling' feeling that I am feeling at the wheel...