Search Results for Query: *

I had cleared the code in mine and it continued to run but I replaced it anyways to avoid being stranded somewhere if it quit altogether. It was really a simple fix. And like I said, I didn't realize how rough the idle had actually gotten especially when the truck was coasting going down the...

Thanks for all the help here. I ran to Cummins here in Nashville today and grabbed a new sensor for around $58 with tax. A whole LOT better than the $105 the Dodge dealer here wanted. Had the old one out and the new one in within about 20 minutes in my apartment parking lot. I didn't actually...

My truck threw a P0336 code the other morning. According to what I've read this is a crankshaft position sensor. The only thing I've noticed different is that the throttle can be a bit erractic at low rpm's while my Edge box is on the stock setting. I cleared the code and it has not come back...

I'm thinking I can get these lights adjusted to be pretty good. They give off a TON more light than the same bulbs in the stock housings but just need to be adjusted down as I have a leveling kit in my truck as well. Once I get them adjusted down I'm thinking they will get the job done pretty...

Just installed my 1 piece clear lenses like budnate had tried today on my truck. Not impressed with the lack of adjustability. Quite a bit more light compared to my stock lenses but they are adjusted up way too high. I'm going to try and adjust the reflecter down a bit and see if that helps if...

I'll be watching to see how your's turns out. I already ordered a set of the 1 piece headlight/parking light housings off of ebay and we'll see how those work but I'm really leaning towards going HID. And I've actually been able to clear up my stock fog light lenses pretty good with the...

I ordered a set of the 1 piece clear headlight housings and going to try them. I've read both good and bad about them on different sites and decided I'd give them a try. I've been running the Silver Star bulbs in my stock housings for a while now and just wanting to get some more light. I think...

Any more info on the deal at Bean's next weekend? Just curious.

Yeah, there were some issuses at TS mostly cause by individuals not acting the smartest. And the pulling track was pretty slick. Most trucks had quite a bit of smoke coming off the tires they were spinning so much. I did have a great time though. Saw a lot of awesome trucks. The gang from Geno's...

So I seen another truck yesterday that I'm pretty sure I've seen on here before. Was heading out from Bass Pro up at Opry Mills and there was a white 2nd gen quad cab short bed pulling in. Had 3rd gen emblems on the doors. I'm almost positive I've seen it on here before. Anyone from here...

Well I figured I'd post some pictures up of mine just for people to see. The under hood insulation somehow "fell off" yesterday and I was quite pleased with what the paint looked like underneath. Just a light cleaning and maybe a wax and it will look great. Started out... And after the...

Ok, just wondering here but seen a truck today and wondering if the owner is on here. There was some guys doing some kind of road work on Wilson Pike in Brentwood and there was a silver 2nd gen with some Moto Metal wheels on it and an Edge sticker in the back window. Great looking truck...

I've been thinking lately of cleaning up the area of my truck that doesn't seem to get as much attention to keeping clean as the rest, under the hood. Wondering if anyone would like to share some pictures of what they have done with there's? The insulation on the bottom of my hood is starting to...

Well thank you very much for the reply Dave. Would the 95 fuel pump be a good choice? Or would you reccomend going with the pump with the filtration system as well and what are the extra advantages of going with that one? I was somewhat wanting to use the FASS brand as I have heard many good...

Been watching my fuel pressure and every now and then it has been dropping a bit. Hasn't really gotten below 9 psi but when I have the Juice on level 3x5 and wide open it does pull it down. Think it might be time to replace the ol' stocker now that the truck turned 180,000 today. The mods I have...

Well I'm finally breaking down and putting some new breaks on the truck. I've got Mopar replacement rear shoes and I'll just turn down the rear drums as there's plenty left but I know the front rotors will need replacing. They're warpped pretty bad mostly from the previous owner and I have...

Filled up the rig in Georgia between Atlanta and Macon this past weekend for $1. 84 at the 201 on I-75. Was the cheapest I've seen anywhere all year so far. I did see it for $2. 07 at the Home Depot in Cool Springs which is cheap for that area especially. I've been all over the place so far this...

Hey there, seen a truck today and not sure if it was anyone from here or not. I was having dinner up at Olive Garden in Rivergate and seen a red 2nd gen quad cab long bed pull through the lot. It was parked out on the grass at Logans on the corner when I left. I had my truck up there parked...

Do any companies still make some sort of a plug in high idle setup? I like the idea of the automatic deal in the ECM from either the Dodge dealer or a Smarty but I also would like to have manual operation of it. I'm thinking someone has to make some sort of a kit that plugs in? I saw all of the...

Has anyone had a dealer flash their computer to enable the high idle? I am wanting to get it done and wondering about how much a dealer would charge to do this? Or if anyone in the Nashville area with a Smarty that would work on a 99 would be willing to help me out it sounds like that would work...