Search Results for Query: *

Hi, Posting for my boss, he's got a 97 12v with a supposed to be built transmission. Guess he was driving and shifted into natural at highway speeds and when he put it back in gear nothing, no forward or reverse. Guess the fluid is still pink and park still holds the truck. Was thinking...

Hi, Anyone know of a supplier who makes a braided brake hose kit for our trucks with no lift? Regards, Jim

Hi, No idea, I replaced the relay, I am not very good at troubleshooting electrical issues like this no obvious melted or worn through wires. Regards,

Hi, Well long shot but here's my dilemma Got a 1992 w250 that has a 360 tbi/nv4500 and won't start. Replaced all the sensors in the distributor Replaced all the relays on the fender Replaced the fuel pump No power to the fuel pump, so I bypassed the harness and still no spark. Also no...

Hi, Has anyone done this, I found a few writeups but no pictures or what's involved. There was a member with a 69 Ford, but is no longer a member and his post is missing pictures now. Or if you have any contact information for him you could share. Thanks,

Hi,Yes, I had a 99 that I *returned to stock prior to selling it. *Regards,*Jim*

Hi, I've got a 2007 st with steel wheels and recently picked up aset or factory forged aluminum rims and the dealer says the lug nuts are the same though the aluminum rims don't have much of a bevel in them so would make me think they should have a shouder on the lug nut can some confirm or...

Have a MADS Smarty model S-03 for 1998.5- 2002 24 valve new price 475 + shipping OBO In MI 48444 Regards

Sold went to a new owner

Yes was ordered new in MI and up to December 2011 was garage kept

Hi, Price Reduced: $17,000 obo make me a offer worst I can say is no Regards,

Hi, My bell has lots of oilly residue, but none on the pressure plate or clutch, plan is to reseal the motor when it comes out, hence why I dont want to buy the 800 clutch just yet not to mention its 30 degrees or colder out and want to spend the least amount of time on the garage floor...

Hi all, I have a 1989 D250 I am in the process of swapping in a NV4500 and, I'm looking for a used stock clutch disc or aftermarket that will work with a stock pressure plate, not looking to get a bunch of miles out of it, I am in the process of getting this truck going for a few months (like...

His all, Ended up just swapping out holder and gear and looks good to go, will now maybe this weekend still had to get a few parts for the swap, now wonder if this will work when I go to install it in my 92 4x4 with a NP241 this spring? Currently getting the 89 2wd running to trouble shoot the...

Thanks for posting a few pictures it, I forgot to That is the what I installed seems to work so far. Regards,

Beautiful well maintained 1999 Quad-cab 2500 4X4 pickup (2nd-owner truck), with approx 155K miles. Cummins 24V turbo-diesel with upgraded injection pump and injectors........approx 425hp / 700 lb/ft. Heavy duty components throughout...Dana 80HD / Dana 60 / NV 241HD transfer case / NV 4500 HD...

Yes it appears to be asound design and used that kit bascially a splined cup that has 4 tangs that you align to the nuts driving lugs so will have to either strip out the splines, nut or new cup or like the other person said shaft and even then it would take a lot as it would have to seperate...

Hi all, Yep got it done over the weekend took about 5 hours working at a moderate pace, worst part was getting the tabs lined up with the nut as I only had the wrench for the nut so keep rotating the engine trying to tighten a bit more to get the tabs aligned Thanks all would suggest this kit...

Hi, I have a 1989 2wd with a G360 that took a dump and have a 95 2wd NV4500 I want to install, I have the advance adaptors kit on order but they did not know how to handle the speedo cable to the newer 95 trans as it has a electric connector Does someone make a kit or a mechanical output...

Hi all, Ok just did a head gasket and ARP studs a week ago (dam my arms are still tired) first time out and bang no 5th gear I ordered a repair kit (see below) and the factory updated nut do I need to get a new gear as well as the TSB listed a gear part number or will I be able to reuse my...