Search Results for Query: *

Well I disconnected the harness and cut back about 2 feet of the plastic wire protector and inspected all the wires with my flashlight. I couldn't find anything wrong with them. I then took some electric connection cleaning spray and cleaned out both ends of the plugs. Looked for bad pins but...

I've been getting the P2121 code for awhile now, did the obvious and replaced the pedal but it came back. Today I decided to dig into it with an article I found to check the voltage. With my scan tool the voltage is within spec at all tests however when I go under the hood and wiggle the big...

I'll give it a try thanks

Bad stabilizer bushings would make a clunk sound when going over bumps? I don't see how that would clunk

Yes

Both of them look like that

Good idea. I think it's my lower ball joints..

Personal preference.. We all have different tastes.

Something is still wrong. Either a ball joint is bad or it's still hitting the strut tower. If I go over a bump I hear a clunk. Mostly on passenger side. All the ball joints were replaced last year. I need to find out the clearance range for this upper control arm. I wonder if it's still...

Took the larger springs off and put stock springs on, problem solved. Maxtrac is working with me and letting me return the springs. Heres a pic. 2.5" blocks in the rear and 3.5" longer spindle arms in the front.

I'm taking off the bigger springs and putting the stock springs back in. That will take it down to a 3" lift. Hopefully MaxTrac will let me return those springs since the kit really doesn't fit on this truck.

Yes, I thought the same thing. It would move up with front end weight The maxtrac kit comes with longer spindle arms and larger springs.

New moog control arms are on and it makes no difference... Control arm is still hitting the strut frame.... Really starting to piss me off....

I measured the height of the front and back and the front is sitting up 1 inch higher than the rear I went ahead and ordered some Moog upper control arms. I have a feeling it's these cheap Detroit axle control arms

Only thing I can think of is that those are cheap aftermarket upper control arms. That might be the issue

Yes it comes with the new spindle arms. I've spoken to customer service and they don't know why it would be doing that lol. It's not a spacer you see, it's the insulator.

Hey All I put the MaxTrac 6" lift kit on my 06 Ram 2500 2WD but now the upper control arms are bottoming out on the strut mount. Does anyone have any recommendations for replacements?

Got the repaired ECM back today from AutoComputerExchange.com. No details as to what repairs were done, just that it was repaired. Popped it on the truck and started it up and she died. Started it up again and ran smooth. Cleared all codes from it and started it up again and ran smooth. Took it...

I ended up sending the ECM off to get tested and repaired if anything is wrong with it, $300 for that. I expect something to be wrong with it since I've had U codes that come and go recently.

It happened again this morning. It's been sitting for a couple weeks so I thought I would drive it. It started up with fine with all the dash lights on as normal. Then it died and the drive/park indicator lights went off. Tried locking and unlocking with key fob but that didn't work. Tried...