Search Results for Query: *

Took the truck to the dodge dealer in Bloomington, Il. They told me that it needs a new rear axle speed sensor, a new transmission speed sensor, and a new ABS module (pump). This will cost about $1000. The probability of all three of these components all failing at the same time is probably one...

Today when I started the truck my ABS light and brake light stayed on. I shut the truck off and restarted, the lights still remained on. When I shut the truck off the ABS pump kept on running. I disconnected the big harness on the pump and it shut off. Four hours later I plugged the harness in...

When I switched from Delvac 1 to Rotella motor, I noticed a smell in the cab for the first 1000 miles. I later found this TSB: A heavy oil or fuel-like odor coming from the diesel engine compartment. This bulletin applies to vehicles equipped with a 5. 9L diesel engine. The problem is a...

Got 2 ingall offset ball joints from action automotive thanks msperos, now what do I set the alignment to? I found this link and was going to probably have the shop aim for these settings. Any recommendations? http://dodgeram.org/tech/specs/00_steer_specs.html

I believe the front axle on the 4wd is a Dana 60, and that there is no way to adjust camber except with these offset ball joints.

My truck has always pulled to the right, especially when on the right crown of the road. Replaced the track bar at 50K and modified to caster to offset pull and it reduced the wander and reduced the pull to the right. But it still pulls to the right. The shop tells me that the left wheel camber...