Search Results for Query: *

I had a similar problem after the garage changed the oil. Found out that they put a different oil in. I requested castrol syntorque only and after they changed it again to the proper oil, no problems (one year now).

Hi Gary Thks for the reply. The pedal shows about 1. 25" of free travel. Can you explain why it would shift fine now? By the way, have always babied the clutch by shifting into neutral at all stops. Bob

Problem with shifting: Have a 97 12 valve with 5 spd, 160K mi. Returned with camper from Mexico to B. C. last week and experienced a problem with first and second, and especially reverse after going over a very high pass to Cedar City (9900ft). It shifted into the low gears but with great...

Thks to all of you; the WD40 , combined with distilled water worked great. Have changed to fleetguard. bob

Problem with shifting: Have a 97 12 valve with 5 spd, 160K mi. Returned with camper from Mexico to B. C. last week and experienced a problem with first and second, and especially reverse after going over a very high pass to Cedar City (9900ft). It shifted into the low gears but with great...

Problem with shifting: Have a 97 12 valve with 5 spd, 160K mi. Returned with camper from Mexico to B.C. last week and experienced a problem with first and second, and especially reverse after going over a very high pass to Cedar City (9900ft). It shifted into the low gears but with great...

Have a friend who bought a 2001 dodge and noticed very dirty (gummy) impellors on the turbo; question is whether any particular care and what solvents should be used to clean the blades? thanks for the help.

I cant believe that noone used some reference to the second coming;

Dave, Finally changed the trany oil to castrol syntorq (actually what mopar uses) and all is very smooth. The synchro works again - thanks for the tip. Bob

Thanks Dave; mechanic suggested ATF, I'll request Castrol syn, and see what happens.

Request advice; clutch is acting up, as synchro is harder to engage (resistance) on my 5 spd 140,000 mi trans; mechanic suggested changing oil although manual says there is never a need to change oil. No alterations other than fuel plate (#11 - 280Hp), but backed off to stock; always babied the...

I ordered from the solidsteel. ca and am very happy with the track bar. He's quite available to discuss the installation.

I have a '97 4x4 Ram - 12 valve, 5 speed, and have noticed a recent reduction in power, especially when towing boat with camper. Have 112,000 miles on engine, that has only been equipped with new fuel stop plate - enhanced to limited amount of black smoke, K&N air filter in stock box, stock...

In Okanagan B. C. Canada, diesel is $4. 86 a cdn gal which translates to $3. 89 US gal. You think yours is high.

Up here in B. C Canada, the price of diesel was . 10 less forever, and just this week, when the cold hit, they are the same. And from what I hear from a friend in the Alberta refineries, diesel is much cheaper to produce.

Thanks Thomas - the starter points were the problem; sure enjoy having you guys to help out.

Can someone please help;Have 97 12 valve;Sporatically get howling from the engine at start up for only a couple of minutes, during which I cannot turn it off - at same time, the charge meter shows only 8 amps, then all is fine, and amperage climbs to 14. For some time after, the meter fluctuates...