Archived 03 truck died

[nfkfirefighter]

Hey guys i was putting in my fuel pres gauge the other day. . its a beta from isspro and ive been trying to get the bugs out of it. . its not working right now so i have no idea what my fuel pres is. . anyway i drove it fine that night it was just like normal. . then the next morning yesterday morning i went to start it up and it started up fine i let it warm up for a sec and i jump out of the truck with it still going and it dies on me. . i try to start it back up and i get a check engine light on and now it wont start. . it trys to start and cranks over good just wont do it. . is there a certain way the banjo bolt hole should be looking? i installed it right with all the washers and stuff. . the night before i only drove it maybe like 1/8 mile down the road and it was fine. . i used the smarty to pull up the codes and i dont see any DTC codes stored and only one Key on counter which is 10975... any idea's? is there a good way to check if i have fuel after the filter housing? anything about the banjo bolt to be looking a certain way?

 

[nfkfirefighter]

i figured it out mods. . you can move or delete this is you want!

 

[nfkfirefighter]

ok i thought i figured it out. . i didnt. . any idea's. . i got it fired up for like 3 sec on either to hope and push the air out of the lines if there was any. . im thinking that maybe there was metal in the line after the filter from the bad banjo bolt maybe??? any idea's?

 

[Bob4x4]

Check the lift pump... ... ... .