Here I am

04.5-05 turbo elbow/downpipe clamp?

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

New Box

3500 /2500 Srw

Status
Not open for further replies.
Part number?

Big Bob I wanted to pickup the same clamp for the same application when I did my turbo swap. I went to the dealer several times, who ordered several clamps but none were correct. Never did get the right one, so I used the original which got tweaked a little out of shape. I thought I might try the cat test pipe again and didn't want a delay if that original clamp broke. Anyone have a part number for these? Thanks to those that contribute here.
 
BIG BOB said:
Anyone have an extra clamp for an 04. 5-05 turbo elbow and downpipe?



Back when I did my 05 elbow swap onto my 2003 turbo, I posted those part#'s - I will see if I can dig them up
 
I went through the same thing. The dealers parts breakdown lists the turbo clamps as being the right item. Those clamps are about 1" too small in diameter. I finally got the right part by taking the old clamp in and waiting two days for the new clamps to come in. The service manual says that the clamps can only be used once and the torque is 100 inch lbs so I got two.
 
Big Bob :

I took my 325/600 elbow elbow to a Freightliner dealership in Lexington (on the advice of a parts manager from a local Dodge dealership) and they were able to match it up without any problems... ... . and they saved me some $$$ to boot.



Greg
 
midlife crisis said:
I too would be interested if anyone knows where to find a 04. 5+ elbow,clamp, & downpipe.



I have like 3 of the elbows. The DP can be bought from any dodge dealership.
 
Status
Not open for further replies.
Back
Top