04.5 fan shroud installation

[Jtsram2500]

I am looking for information on the mounting for the 3 inner fan shroud brackets to the engine block. I have a service manual but I've found nothing describing this info. Nothing but the outer shroud was on the truck when I bought it and since then the tensioner pulley broke and it destroyed the fan wiring harness. I then bought the clutch fan,outer and inner shrouds and brackets(the brackets where bought online used). I have a good idea where they go but the larger bracket on bottom doesn't line up with the holes on the engine behind the balancer. Could this lower bracket be for a different model it seems to narrow. These are the numbers on the brackets 3970527,3970530,3970394.

the center to center spacing on the lower bracket is 9 7/8. Thanks for any info.

 

[cerberusiam]

Yeah, there are differet shrouds so ther emight be differnt brackets. IIRC, your truck should have the shroud that splits in the middle. Not sure if the brackets are different but f the bracket that has 2 mounts on it won't fit they may have tapped the front case differently.