Hello, My name I Ryan and I'm new with TDR and have some questions for anyone out there. I have a new 05' 2500 4x4 QC SB w/ 6-speed and have only 2100 miles on it and got it about 4 weeks ago. I have been taking it easy for the first 3 weeks and then I kind of got on it a little the other day of the line and had some black smoke come out in every gear exept six and was wondering if this is normal this early on a new truck. My 2001 didn't start doing that until alot later. Also, to make a long story short it took 2 1/2 to 3 months to get my truck from the factory because I was told that chrysler is not putting their six speeds in them anymore and are going with a German made transmission and they were switching that around when my truck was built and apparently I'm one of the first ones to get one. Let me know if there is someone out there with one and what do you think of it? The reverse is in a different location then the old ones and I have some questions on when you go to change gears and let off on the clutch it sounds like the drive shaft knocks everytime but nothing is loose down there and I asked the dealer ship before I drove it off the lot when I bought it and they said everything checked out o. k. and tight and thats the way the new German transmission is. Let me know anything on these questions or any feedback and I will try to do the same for anyone out there also. Thanks Ryan In Indiana