I don't like how the 48RE in my 06 3500 shifts. For example between 1st and second gear there is a pause where it seems to go into neutral and then when it goes to third it only stays in third for a microsecond before shifting to 4th immediately(again with the pause/slip) Then it'll go into OD with a nice firm shift. IMO a HD auto trans should shift quickly and firmly (my 47RE did). Is there a re-flash or adjustment that could be made to address this? When I manually shift, the shifts are quite firm especially if under heavy throttle.
Also, at certain RPMS, the sound of the engine changes for a brief second, it sounds like the injection process is changing especially noticeable under light throttle, and for lack of better term the engine briefly aquires the "sewing machine" or high frequency rattle sound, then it quickly passes. Is this just a common rail thing or should I be concerned?
Also, at certain RPMS, the sound of the engine changes for a brief second, it sounds like the injection process is changing especially noticeable under light throttle, and for lack of better term the engine briefly aquires the "sewing machine" or high frequency rattle sound, then it quickly passes. Is this just a common rail thing or should I be concerned?