2nd Gen Non-Engine/Transmission 1/2" GSI Sound Stop Foam Price Reduction

[KL]

I know that a lot of people have been using this product. Great Southern Insulation Corporation (GSI) has been giving TDR members a 15 percent discount. But JC Whitney had been selling it cheaper. So I talked with Don Barnett of Great Southern Insulation and he agreed to a 35% discount on the 1/2" Sound Stop Foam for TDR members.



The new price after discount is about $3. 20 per square foot which is cheaper than JC Whitney. Be sure to mention the 35% TDR discount on the 1/2" Sound Stop Foam. Their other product's are still 15% off. KL



P. S. I am not associated with Great Southern Insulation in any way, but I have used the 1/2" GSI Sound Stop Foam and I feel it is an excellent product.

 

[vc]

KL,

good going!!

vc

 

[sherndon]

Way to go KL!Oo.

 

[Lsfarm]

Thanks

Thanks KL, I haven't had the time to make that call, I appreciate you doing it for us.



Greg L. The Noise Nazi

 

[dflack]

excellent!

super. can you provide a phone number, link, or person to contact there to make ordering most efficient.

 

[TomGolden]

Great Southern Insulation web site

 

[Boondocker]

how much to order

If I decide to go the foam route instead of liquid, does anyone have any estimates on how much to buy. I imagine there will be some waste due to trimming. I have a Quad Cab and want to cover from as high up the firewall to the top of the back wall and all four doors.



Thanks,

Neil

 

[KL]

dflack, talk with Don Barnett at 800-763-1844. Klaus

 

[KL]

Neil, I used one piece on the back wall of the cab and had some left over. I have'nt done the doors yet. Hopefully someone who has done the doors will chime in. Klaus

 

[TomGolden]

I have so far put the 1/2" SoundStop foam on:



* entire floor

* 2 layers on the rear wall

* both quad cab doors

* both main doors

* both sides on the rear side walls between the quad cab doors and the rear wall



I have used a total of just under 6 1/2 sheets of the foam. If I hadn't done 2 layers on the rear wall, I would likely be at just under 6 full sheets.



So, I would say order 6 sheets to do it all.



As GregL (The Noise Nazi) has done, I am going to use my 2/3 of a remaining sheet to do the oil pan at some point pretty soon.



Oh, I have also gone through about 2 1/2 cans of the spray adhesive. I ordered one can of spray adhesive from GSI, and have used about 1 1/2 additional cans of 3M 77 spray adhesive, as per Greg's recommendation.



Tom