Here I am

1/4 Mile ETs?

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

How in the heck do you get rotors off of my ram>?

Wait to start light

Status
Not open for further replies.
ET's

My 99 with EZ and 275's launched in 4 with 20lbs of boost put me at the other end in 16. 4 sec at 90 mph. On the 29th I will be going to the strip with DD2's, DTT and some other trick horsepower. I'll post what I run.
 
we are here tooo

Hey guys we hit the track again Mopar Muscle after being late typical for him only got one pass in due to trouble with cars at the track and the crowd ran a 14. 3 on street tires and it hiccuped confused: : at half track. Will be heading back on fri night will keep ya posted
 
Not Bad

Wade, mine went a 18. 18 without the EZ so I would say thats pretty good for a 4x4 with an auto since mine is a 2wd with a 5 speed. With the EZ it dropped to 16. 20@84(both runs done on the same day). In cooler air it has 15s in it If I can get the 3rd gear tire spin cut down. Maybe I should try letting out of the smoke pedal when I shift lol. To bad my EZ won't plug into your 2001

Clark
 
I think I'll lay claim to the quickest 4x4:) maybe, I ran a 12. 67@104. 66 in 4wd last time to sears point racway.

wieghed 6300lbs, on 35"bfgs, 1. 703 60' time.

bd pump with Piers camplate

370 injectors

hx40 w/16cm2 straight piped out the back

bd transmission with x stator, currently waiting for my "race" tc and transmission for the last 2 months

performance diesel lpg injection

my own simple nitrous with a 73 jet

bd 24 valve intercooler

my head porting with a . 020 thicker head gasket
 
Bone Stock

In Muncie I ran a 18. 684 at 75. 41 in a H/O 6 speed started in 2nd finished in 5th. Now I can start to fix that I just got my gages installed and Banjo bolts just came in. looking at fuel psi gages now then DDII's and a box :D :D :D that should fix it for now.
 
I have a 2000 2500 4x4 cc



I raced my truck stock a got:18. 32@75. 03mph.

Then I added a PE hot box:16. 47@84. 53mph.

Then added a set of 275 injectors:15. 52@87. 50mph.

All these runs are made at 200 feet of elevation.



The next time out I ran my truck with:

DD2 injectors,PE hot box, PE EZ, Piers Super Turbo:14. 66@91mph

All these runs were made at Muncie Raceway were I don't know the exact temp and elevation but it was hot.



Then last weekend I ran with:

DD supermental injectors,PE Hot box,PE EZ,Piers Super Turbo,and I ran a:14. 08@94mph.

This run was made at 2700 feet and it was 95 degrees.



I am going out this weekend at sea level to put the truck in the 13's.
 
Outrageous... . these are full size trucks here... DAMN! Fastest truck I've ever owned was a 1983 S10 Chebby... . with a Power Packed 283 in the snout... Ran 14. 70's in the quarter. Fast enough on the street to tame wild mustangs... Looks like more bombing is in order... When is payday??? ;)
 
The race truck beat a 340 Duster that one of the mechanics from the dealership races every weekend. Cummins Diesels rule down here in the deep south. Hit that payday and take your truck over to Southern Truck Parts in Atlanta. Jeff will give you something to smile about. Of course that smile may just be the skin sliding back on your face from the acceleration.
 
Well,this past weekend I went racing with the Kondolays. This was the first time I've ever had my truck at the track. My best time was 15. 89 and this is with a 6spd rig weighing in at 7320 lbs.

2nd gear starts and shifting all the way through 6th. Powermax3 on level 7,DD2's and BFG all terrains. I'm quite happy,and with a little more practice I'll get better. :D



-Mike
 
Dog, Mike. That's moving some big iron down the track. Congratulations. Next time we see you will be on TV on Sunday afternoon running against the pros.
 
Stefan, it was 93 degrees with the humidity @90%. It was robbing us of our hp! I ran a 14. 03 with a best speed of 95. 15.
 
I ran a 17. 96 @ 75 mph with a bone stock truck at Muncie. I put on an EZ to test what difference it would make and turned a 17. 3 . I think the EZ was on the lightest setting because I should have done better than a 17. 3 (I think).
 
Status
Not open for further replies.
Back
Top