Engine/Transmission (1994 - 1998) 100 plate

[cluckmaster]

Is there a template out there or online for grinding the 100 plate? I've got a #8 and wanted to maybe grind it while I've got it out doing the governor springs. I realize they're normally ground from a stock or #10. Thanks! -Josh



97 4x4 SLT Ext cab/ 252k mi/ 35" MT Claws/ Lukes linked/ # 8 plate/ 3k GSK/ Hogue cam/ DIY ported head/ marine head gasket/ ARP head studs/ Scotty II/ MBRP 4"/ 17*/ KDP tabbed

 

[Erik.Miller]

Here is a pic of the 100 plate compared to a 10 plate. This may give you an idea on the profile of the 100 plate.

 

[Erik.Miller]

Here is a template I got from another thread on how to grind a 10 plate. You could use the same template, just eliminate the step at the top.

 

[cluckmaster]

Sweet. Thanks guys! -Josh

 

[Signal73]

another side view:

 

[OPoole]

Is this a plate that you gound? I have a few stocker around here and need to do something with them.

 

[Signal73]

I actually had Northslope from the dieseltruckresource.com cut it for me, however it was cut from a stock plate...

Northslope is a cool dude up in alaska (no pun intended ) who cuts them for a hobby.

 

[OPoole]

Maybe i will send him the 2 i have here. Thanks Olee