Here I am

1000 h.p.

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

05 engine failure.. Please help

Front Crank Seal

Status
Not open for further replies.
No but Joe Donnelly's 97 12 valve (sickly) dynoed over 900 hp with fuel only so I imangine it could be possible. ( Joe bought his 04 soon after).
 
Yes. Theres plenty of trucks that put down 1000 on fuel. I know I cant remember them all. Tim Barber is over 1k in his silver 04 reg. cab. Eric Brown has a white 03 that currently has the fuel only record at 1036 or something. Theres more but I cant think of them right now. And those are Common Rails. No VP or VE trucks on fuel, but theres a good number of 12vs over 1k...
 
Banks uses a lot of nitrous on that truck. That's why it doesn't smoke.



I believe the Sidewinder theyre referring to is the Dakota with a CR Cummins in it that set and I believe still holds the landspeed record at 223 or something like that, NOT the Duramax-powered S10 drag truck



i want to know if they are streetable and i would like to see one of their cylinder heads



Streetables a relative term. To one person 1k is streetable, to another 600 isnt, let alone 1k. Can you drive a truck packing that much power on the street? Sure you can. Will it smoke like a SOB and have massive turbo lag? Depends on your foot and the turbo setup, as well as altitude and such.



A more likely scenario would be driving a truck thats CAPABLE of laying 1k+ on the dyno, but is turned down to say 700 or so for the street.
 
I believe Lloyd Mills is at or above the 1k mark also. I don't know if he is using drugs but I do know its on a single charger
 
trying to figure out how the guys on the comp forum are well over 1k with a twelve valve head with stock plenum still attached running only fuel and water.
 
PDI has made over 1100 hp on fuel using II turbo's and fuel injectors, injection pump's. Thats the most i know of.



i am back on the market for turbos that can support this, but not sure which ones have proven this, i believe my modified lmills and industrial injection fuel system can support this, if i want i can blow the top of my 63ltr bfi injectors off if i command it to :eek:
 
Status
Not open for further replies.
Back
Top