Competition 12 Second Dually

[Cummins Thunder]

I got the ol girl to make a 12. 69 pass last night

Pulled off a 1. 822 60 ft despite some bad wheel hop. I was told by a guy standing beside the line that all six left the ground at one point or another

I started the night with a 13. 593 @ 104. 82 and made a second and final pass of 12. 693 @ 105. 58.

A few weeks ago (Pre Lorenz 2. 25 and BD RAD) I was making passes at 106. 3 to 106. 7 at 13. 1 to 13. 2 I am thinking the 2 inch taller stance is hurting my MPH and I am sure my time to a certain extent.



<object width="425" height="350"> <param name="movie" value="http://www.youtube.com/v/ICgH7JMCS1E"> </param> <embed src="http://www.youtube.com/v/ICgH7JMCS1E" type="application/x-shockwave-flash" width="425" height="350"> </embed> </object>

 

[JMachemer]

very nice #s. what fer injectors are u running? I ran my truck a few weekends ago and managed a best of 13. 56@102mph. Just how did u manage to pick up almost a half second with your quickest run? I wish i could pull one of those out of my hat.



how does the BD RAD work? is it an easy install?



Congrats

John

 

[JMachemer]

i saw your other post on the site about the RAD. I am sure its a boat load of fun to drop the hammer at over 30lbs of boost and not have the torque choker turn on. Good luck with keeping all the parts and pieces together.

 

[Cummins Thunder]

very nice #s. what fer injectors are u running? I ran my truck a few weekends ago and managed a best of 13. 56@102mph. Just how did u manage to pick up almost a half second with your quickest run? I wish i could pull one of those out of my hat.



how does the BD RAD work? is it an easy install?



Congrats

John

Thanks for the congrats!



200hp DDP injectors. I am looking for some mach 7s.

The RAD got me into the 12s. As for the install, if you can install an Edge Comp you can easily handle the RAD.

BTW, I have done 100% of the work my self.