Engine/Transmission (1994 - 1998) 12 valve 174 hp with a p3000?

[TBurow]

i might be picking up a couple 12 valves with what is an inline pump which looks like a p7100 but is stamped -3000 it is cpl2063 and rated at 174hp. they are all reman engines from recon. are they any good? and can theese pumps be used in a dodge application? any info will be appreciated.



tag on the inj. pump is 3935787la m051005073b -3000

 

[NIsaacs]

I am not sure, however the 3000 series fuel pump might be the Nippondenso? Again I am not sure but it seems like it was used in marine applications?



I did some research on the 2063 cpl, and it does come back to 174 hp at 2200 rpm with p3000 series pump, can't find application tho.



Nick

 

[TBurow]

this is in an industrial application like spotters and semi trucks and looks identical to a p7100

 

[TBurow]

no one has any info on these? I can't find anything on them.

 

[Dieseldemon]

The p3000 was used on both auto and ind. engines auto on pre 1994 used the RQV-K gov. Ind used both govs. If you need to know more get me a part # and it is from Bosch

 

[TBurow]

0402066703 or 9630800121 or pes6p120a120r53358

 

[Dieseldemon]

0402 066 703 is off of a 6CTAA cpl 1846 900ft lbs 280 hp 280 hp @2200 timing is 17 high idle-no load is 2473 CPL 2063 is part # 0402 066 707 and 0402 066 708 is off 6BTA 185 hp@2200 580 ft lbs@1500 13. 5 engine timing high idle no load 2457 and 2565 the 708 is 185 hp @2300 Hope this helps

 

[TBurow]

it was 0402066709 i also have a 0402066707. they dont appear to have a fuel plate, does anyone have a diagram or pic of a cutaway? i would like to use theese in a few conversions without having to replace the pumps. if possible, and would like to turn them up a little.