1996 with 124,000 miles LED headlight upgrade

[Scotty B]

I installed new lenses from Genos. Tip - remove the main headlight lens out of the frame. It will easily fit behind the front bumper plastic w/o loosening the bumper bolts (which is a pain). I followed the official shop manual for alignment. Make sure to order turn signal lights that have built in resistors so your flasher works correctly.

LED headlamp bulbs say they are DOT approved on the units. Major improvement. No one flashing their high beams at me.
HIKARI 9004/HB1 LED Bulbs,12000LM High Lumens Dual Beam LED Conversion Kit,Japan CSP LED Tech,30W Thunder CSP LED Equivalent to 80W Ordinary LED,CANBUS Ready,Halogen Upgrade Replacement,6000K White

Parking light LEDs
Alla Lighting CAN Bus T25 3156 3157 LED Bulbs Amber Yellow Turn Signal Lights, Plug-n-Play 3457NAK 4157NAK 5702AK 3757AK CANBUS Blinker Lamps Upgrade

Back up LED's
iBrightstar Newest 9-30V Super Bright Low Power 3157 4157 3057 3156 LED Bulbs with Projector Replacement for Back Up Reverse Lights and Tail Brake Parking Lights, Xenon White

Tail lights:
https://www.topgearautosport.com/116968/dodge-ram-1994-2001-led-tail-lights-red-and-clear

Lights are amazing. Not too bright. Probably easier than the sport duel headlight upgrade.

 

[I Buck]

like your pillar gauges.

 

[JMcCoy]

That is awesome!

 

[Shelby Griggs]

What brand of new housings did you get? depo? Are you saying you took the lens off to install them and then reinstalled the lens? If you still have the OEM rubber welt, save it, the aftermarket rubber welts fall apart in short order in my experience.