Engine/Transmission (1994 - 1998) 1998 2wd ball joints

[Texas Diesel]

My 98 needs 4 new ball joints, idler arm, and pitman arm. Anyone have suggestions on where to buy replacements? Dont want non-greaseable OEM if I can avoid it. Thanks!!

 

[bmoeller]

Found this on another post- http://www.trademotion.com/partloca...=1998&graphicID=T039090&callout=9&catalogid=1



https://www.turbodieselregister.com...p?s=&threadid=89332&highlight=2wd+ball+joints

 

[Bill Lins]

I got Moog greaseable ball joints for my truck @ Car Quest.

 

[LaserBob]

Try {www.rockauto.com}



I got mine there and saved $

 

[kkriz]

Just did my uppers and lowers about 6 months ago and used Moog parts from a Carquest supplier. A little pricey but sure made a difference.

 

[Texas Diesel]

Ok, got the ball joints and other stuff from the suggested suppliers Moog- all greaseable), now to the steering box. It has no side to side play and no play in the wheel but the shaft slides up and down (in and out of the gear box) is there a way to adjust the end play?

 

[Dennis Garrett]

If you're talking about the steering shaft going into the box, the preload adjustment should take care of it.

http://dodgeram.info/tsb/1997/19-10-97.htm