Attention: TDR Forum Junkies I need to know what the torque specs are for the 1999 "T" steering setup. The 2002 had self locking (nylock) nuts, but the 1999 setup uses castle nuts so I don't want to use the specs from the '02 manual. I need the torque specs for each of the tie rods, both adjusting sleeves (tie rod/crossbar, and draglink bar), and each end of the draglink (at pitman arm, and at crossbar). Thank you
P. S. Does anyone have an opinion as to what I should set my 'toe-in' to? I have never needed to have my truck aligned (in 7 years) and currently the 'toe-in' is 1/4" - seems a little much. What is 'toe-in' spec on a '99?
P. S. Does anyone have an opinion as to what I should set my 'toe-in' to? I have never needed to have my truck aligned (in 7 years) and currently the 'toe-in' is 1/4" - seems a little much. What is 'toe-in' spec on a '99?
