2nd Gen Non-Engine/Transmission 2" lift - 4 corners.

[Tardog]

So after doing some searching, I haven't been able to find much info on a 2" lift for the rear of my truck. So I have a few questions. I would like to keep the ride as is (or better).

a) Spacers in the front or new coils if coils which ones?. I just put in new shocks so I'm hoping not having to replace them.

b) New springs in the back or ? The back of my truck sits level already so a lift in the front will make it nose high.

Will a 2" lift require any other changes (steering/trailing arms?) Where should a person get these parts? Any input would be appreciated

 

[LOtero]

i did the spacers and did rancho 9000s i am happy with the ride, plus with the 9000s you can adjust the stiffness of the shocks. after i did the spacers i didnt like the look so i did a 1" block in the rear, i picked the all steel blocks up from my local spring and suspension shop for 40$ i am sure they have 2" blocks as well. with the spacers and blocks you should retain a factory ride.

 

[jrobinson2]

I would recomend the KORE performance front coils and rear minipacks, 2. 5" lift in front, 2" lift at the rear and better ride.



Jared

 

[LOtero]

i agree go with the kore