Here I am

Engine/Transmission (1998.5 - 2002) 2000 Ram / Comp box surg problem

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

2nd Gen Non-Engine/Transmission no parking & dashboard lights

Engine/Transmission (1994 - 1998) Seals and Oil pan gaskets?

Status
Not open for further replies.
:-{} I have a problem I am not real serg why. I have other mod's on my 2000 24 valve Ram. The last few weeks I seem to get something like a "serg" when I put my foot into it. Works fine with C/B off. If I set the box at 1... ... . 2>3>4> not too bad with surg

2... ... 2>3>4>5 at top RPM get surg.

3... ... 4>5 get some surg

4... ... 1>2 get some surg

5... ... . 1>3>4 some surg

runs best at # 3 and 2>3 setting. I was told it could be a bad ground or I might need to cut the "BOOST " back some. It does this off and on "NOT" all the time. Other then this off and on it works really great. Any idea on what might help this. One question ( CAN YOU USE ELECTRIC POINT CLEANER ON THE ENDS? Thanks SAM :confused:
 
Mine was doing this for the better part of 6 months, finally I moved the ground to the battery and the problem hasn't been back since.
 
Status
Not open for further replies.
Back
Top