2nd Gen Non-Engine/Transmission 2000 VIN Info Needed

[Extreme1]

I picked up a '00 Dana 60 front axle to put in my '94 (better brakes) for a real good price. It needs 1 wheel bearing assembly (non-ABS) but in the newer parts listing they go by VIN, not options.



Since I don't have the VIN info available, can someone with an '00-'02 2500 or 3500 4X4 please give me the last 3 letters of the VIN before the last 6 numbers and then tell me if you have 2 or 4 wheel ABS?



I don't need any of the numbers, just the 3 letters before the last 6 numbers.



Or, if anyone has a link to someplace that has the info, that would be great.

 

[Bob Wagner]

here ya go



http://www.dodgeram.org/tech/specs/VIN_decode.htm

 

[Bob4x4]

I picked up a '00 Dana 60 front axle to put in my '94 (better brakes) for a real good price. It needs 1 wheel bearing assembly (non-ABS) but in the newer parts listing they go by VIN, not options.



Since I don't have the VIN info available, can someone with an '00-'02 2500 or 3500 4X4 please give me the last 3 letters of the VIN before the last 6 numbers and then tell me if you have 2 or 4 wheel ABS?



I don't need any of the numbers, just the 3 letters before the last 6 numbers.



Or, if anyone has a link to someplace that has the info, that would be great.

The parts can still be looked up by application... ... . the dealer you are using is most likely using star parts. That system eliminates parts that are not on your vehicle. If you are looking for most hard parts a Dana Dealer will beat a Dodge dealer.



Bob

 

[Alphacowboy]

dont even bother with the dealer for those hubs! Go to Napa, they are cheaper, and the warranty is TEN times better! If you REALLY want to fix those hubs and never mess with them again, look into a dynatrac free spin hub conversion.