Attention: TDR Forum Junkies 
Remove two screws in ashtray and one door behind door release handle. Start by pulling out side nearest the hinge side. It has metal clips there that will release. The other side has yellow plastic push pins. Better to use door panel removal tool to pry them out. When installing put hinge side in first where metal clips are. The make sure plastic pins are all straight. Make sure they are slide into round hole so the line up and tap panel in. You will feel them grab. Usually they last a few times but not bad idea to get a few spares in case they break. Easier when it's warmer temps.
Last edited:
