2nd Gen Non-Engine/Transmission 2002 Wheelhouse liners

[JRihani]

Since Dodge was too cheap to put rear wheelhouse liners in my truck I'd like to put them in myself. Does this part number work in the 2nd gen trucks?



82207367 Wheelhouse Liners



I was planning on ordering them today, can anyone chime in?



Thanks!

 

[Thomas]

... Does this part number work in the 2nd gen trucks?



82207367 Wheelhouse Liners...

No! The number you listed is for 3rd generation Rams.



The same liner (P/N 55346010 SHIELD, Wheelhouse) is used on left and right sides for the rear wheels of second-generation Rams.

 

[JRihani]

Thanks for the information, I'll try that part number out.



Thanks!

 

[gtobey]

Thanks for the information, I'll try that part number out.



Thanks!

I don't remember the part number, but I put them in mine, and they help keep all the crud out of the springs and off the top of the frame and inside the rear fenders. Great in winter to help keep salt from being sprayed everywhere in the rear. Be sure to get the factory clips along with the liners so you can install them. I used a modified rivet gun to tighten the plastic rivets. It worked OK. Good luck!

 

[jersey diesel]

wheel wells

Is there anything that will install in the front liners for the 3rd gen? tks. Steve

 

[JRihani]

I found the parts at a good deal and reasonble shipping online. It seems they have been "de-kitted" and do not include installation hardware. I believe they called out for 14 plastic rivets. The same place that gave me a good deal on the liners wanted over $2 a piece for the rivets! No thanks! Anyone know a good source? NAPA?

 

[Fishin Guide]

My plastic rivets came from NAPA.



Dave



Here's some more info...



Part info for rear fender liner