Here I am

2006 turbo leaking oil.....

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Help! Won't Start

Engine seals.

Status
Not open for further replies.
Ok so I have a 2006 3500, with a PR XB Pac exhaust brake, I manually turn it off and on, IE I also have a Kilby enterprises Air compressor, so I opted not to run Pac brakes controller. Anyway the truck is stock minus these 2 items, Well I found a larger size oil slick in the street yesterday :--) and the only thing I can seem to find a culprit of the leak is around the turbo, :{ See photos. :eek: Looking for some ideas, recommendation, and suggestions, before I see the dealer, :-{} I do use the truck every day, and do pull a trailer >50% of the time. Truck has 26K miles
 
Wait till it cools off, break clean it real good, let it dry and then start it up and watch were the leak comes from. Maybe the two bolts on the return tube are lose. Good luck.



04. 5 3500 6x6 quad cab 6 speed 373 27k

93 250 2wd xcab auto 354 240k
 
Nope bolts weren't loose, not rock hard tight but snug enough to keep a seal, by the way the oil slick is about 1 foot accross and left for 24 + hrs.
 
well talked to the dealer, yup need a new one, under warentee they said. Waiting for the part no issues so far.



I will update after I get the new one in.
 
see if you can get a free oil change out of th edeal, if fluid can come out, fluid can come in... EG wate...

glad they are calling it thier fault.

Grant
 
Status
Not open for further replies.
Back
Top