Here I am

2007black smoke no power

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

To add or not to add friction modifier?

Status
Not open for further replies.
2007 egr was removed and pipes rodded out. after filling up started blowing black smoke and no power. No comp. codes or lights, drained fuel added additives no luck. sounds like the exhaust break is open . Any ideas. this is a buddies truck not mine.
 
Check the intercooler hoses first. Make sure the clamps are tight and there are no holes. That's the cheap and easy place to start.
 
The exhaust brake is integral to the turbo, and I am not sure what you mean by open. The non-brake position of the VGT is open.

Did this occur immediately after the EGR/DPF mods? What tuning is used to bypass the EGR/DPF?

Without codes it sounds like a air leak, so I would follow what AMink recommended.
 
Check the intercooler hoses first. Make sure the clamps are tight and there are no holes. That's the cheap and easy place to start.

Another cheap check is pull the intake hose off the turbo, might be a shop rag stuck there.

Nick
 
Status
Not open for further replies.
Back
Top