2011 block heater plug location

[Threewolves]

I need the location of the block heater plug or cord plug in location for a 2011 larmie longhorn. I need more clues. Passanger side, under the intake, where? Thanks, Paul

 

[Hoefler]

Usually around the right side tow hook.

 

[Bob V]

Its possible that you don't have one, they where an option. I looked for it on my 2011 and all I have is the element

 

[mfurrh55]

Yep it's an option, They quit offering it in warmer climates in 2005,Monte

 

[Threewolves]

Thanks for the replies. Nothing around the tow hooks. If I happen to find the element can I just plug a regular extention cord into it or does it take a special plug in? Knowing where the element is might be another helpful clue. Paul

 

[JHumphries]

No it's a special block located behind the oil filter.
I have the bumper mounted plug from Genos if you're interested.
I bought it when I had a '10, but never installed it.
I just found it again today and was about to list it.
I'm not too far from you either...

 

[orhusky]

Same with my 12. Had to buy a cord kit from Geno,s. Got the one with bumper bracket. Works great. http://www.genosgarage.com/BLOCK-HEATER-BUMPER-PLUG-10-12/productinfo/WD-BHP-10/

 

[kkelley]

Mine was pretty tucked in up above the right side tow hook. I looked all over and didn't see it. Then while changing the oil I recognized the cord coming off of the heater unit in the block, traced it up front and found the cord behind the inner bumper metal above the right hook.