2013 replacement fuel filler tube

[krich]

Anyone know of replacement filler tube for 2013 diesel capless? would like to use high volume pump and not need to stand there twisting the nozzle at 30 degree angle to keep from shutting off with normal nozzle. I keep hoping Transfer Flow will do one but they don't seem to be moving on it. Thanks

 

[gsbrockman]

I have zero problems refueling my '13 and '14 with capless fill (standard nozzle or truck stop size nozzle). There most likely is a legitimate problem though, as others have mentioned issues with refueling.

 

[Ram4Sam]

I would bet a filler neck from earlier 4th gen (10' to 12") would fit but you would have to make it fit with the DEF fill pipe.

Sam

 

[Kirwin]

Fuel fillers are different, at least for my 2003 to the 2013. They are all steel tubing over to the top of the frame rail, then a jumper hose to the fuel pump module. See below.

 

[Kirwin]

You can see I cut out a section of the vent line and replaced it with rubber hose to allow me to install the Transfer Flow Y connection. I don't have picture of the 2003, but it was just a metal filler tube and a much longer hose that extended all the way to the fuel tank fittings. In my opinion, it would be difficult to retro fit an earlier version fuel filler as the hole in the fender is not very large and there isn't much room with the DEF filler in there also. Ken Irwin

 

[Ram4Sam]

This is why I don't bet very much......I'm not that good at it While I haven't filled my tank that many times, no issues when I do.

Sam