2019 Tradesmen CC 4x4 duallie full length nerf/side bars?

[mopar440cu]

Anyone have any recommendations for a full length black nerf/side steps that will fit this new 2019 tradesmen? Its been awhile since I bought some and cant find the ones that i have on my other 3500 Dodges that have them. LOL

Thanks for any info or advise!!
Steve

 

[12LaramieHO]

Anyone have any recommendations for a full length black nerf/side steps that will fit this new 2019 tradesmen? Its been awhile since I bought some and cant find the ones that i have on my other 3500 Dodges that have them. LOL

Thanks for any info or advise!!
Steve

Steve,

Try Westin Automotive group. Actually the link I am sending you is for a 2019 3500, I already did the year and model search for you. So the link is their products for your truck. It has the blacked out ones.
https://www.westinautomotive.com/nerf-step-bars-running-boards/2019/ram/3500

I run Westin, stainless, polished and chromed on my 2012 2500 CC and have since it was new. I am perfectly happy with them. Only complaint I have is that when wet they can be a little slick on the step pad and the step area is not all that large.
They have a lot larger selection now then they did back in 13' when I installed them.

~Chad

 

[Timd32]

Some pics and info here from recent posts.

https://www.turbodieselregister.com/threads/who-makes-the-4th-gen-oem-nerf-bars.267105/page-2

 

[Signal73]

https://www.luvernetruck.com/running-boards-side-steps/side-entry-step?side_application_desc=1785

I did these, nice coverage protecting the rockers. They are one of the few where you can upgrade to body bolt mounts instead of rocker panel mounting. I only used the cab length boards but they do have bed extensions.

 

[SnoKing]

The thing about the AMP steps is that they extend out further and a little lower. People that have them love them.

#ad

 

[AH64ID]

By full length do you mean cab length or wheel to wheel?

 

[mopar440cu]

By full length do you mean cab length or wheel to wheel?

Wheel to wheel, if possible.

 

[Cummins2014]

The thing about the AMP steps is that they extend out further and a little lower. People that have them love them.

#ad

IMO the best step out there, regret not getting them to start.

 

[AH64ID]

IMO the best step out there, regret not getting them to start.

But they don't offer wheel to wheel, which is what the OP is looking for.

After having wheel to wheel I wouldn't go back to cab length.

 

[Cummins2014]

But they don't offer wheel to wheel, which is what the OP is looking for.

After having wheel to wheel I wouldn't go back to cab length.

I guess I just haven't got old enough at 72 to not be able to either step up on the tire, or I use the Amp bed step in the back to get in the bed , I am sure the day is coming. Regardless any side step I have had for ANY truck I have had does not come close ,again IMO to the Amps .

 

[AH64ID]

I guess I just haven't got old enough at 72 to not be able to either step up on the tire, or I use the Amp bed step in the back to get in the bed , I am sure the day is coming. Regardless any side step I have had for ANY truck I have had does not come close ,again IMO to the Amps .

I’m only 39, and have a decent reach at 6’4”, but alas... if amp made a wheel to wheel I’d probably buy it thou.

I also have the Bed Step and love it.

 

[GrantP]

My only regret about the AMP steps is that I didn't buy them years ago. There is no way I would ever go back to a factory running board or aftermarket tube step now.

 

[HookMeUp]

I used the OE CC SWB wheel to wheel steps on my Dually, they stop just before the rear fenders start to flare out. They work well, I can step on them and reach into the front of the box. I can take pictures if needed.

 

[dieselshadow]

I wish I would’ve know that. I would’ve done the same.

 

[Cummins12V98]

I have cab length painted OE steps that are great. I built this for my DRW. I easily reach my B&W locking handle and into my bed height 30" front to back tool box.

 

[mopar440cu]

Well I went with the Westin Pro Traxx 6" black oval. I really didnt find one I liked that was full length/wheel to wheel and I didn't want an electric one do to where I live in the country. I appreciate everyone advise!!

 

[Cummins12V98]

mopar400cu, now all you need is one of my bed steps.

 

[mopar440cu]

mopar400cu, now all you need is one of my bed steps.

View attachment 115585

I’m trying to figure out where and how it goes on my DRW?

 

[Cummins12V98]

I placed it just in front of the drivers side rear tire. I can then reach in my tool box and B&W hitch locking handle.

In stowed position it's barely noticed.

 

[SnoKing]

Ron, made that or had your friend at Simley's help?