2500 Timbren install

[CUMMINZ]

I will be installing Timbrens on 2500 4x4 this weekend. Suggestions on space to leave between bottom of Timbren and top of axle.

 

[mconstable]

On the new Timbrens, they give you a rubber donut spacer to fine tune the gap a bit... I've got about an inch gap on my truck, they work great

 

[Dieseldumb]

I have the 11. 50 axle on my 2500 and keep a 1" space by using the 1/2" spacer supplied by Timbren(they also supply a 1" spacer). Use a 15mm wrench and install should be about 45 minutes. They work great!

 

[CUMMINZ]

Timbrens installed

Installed my Timbrens today. I have about 5/8" space to axle.



#ad




CUMMINZ NC

2004. 5 CTD, Flip-Over/RV2, 32' KeyStone Sprinter, Tornado, TST, AMSOIL, 4x4, 4. 10LS, 315x70Rx17 BFG, 8" Factory cast aluminum, 2" front lift/w RC shocks, Line-X, Hellwig sway bar, Timbrens, Banks monster exhaust

My Truck at www.GoRowan.com/2004ram

 

[JCasper]

Where did you get your Timbrens, and what is the best price you found.

 

[CUMMINZ]

Timbrens

I spoke to Timbrens direct and they gave me dealer in Charlotte, NC. I paid a little over 200 bucks.



I am using them as we speak on my first trip and I will say they ruffed my ride a lot. Much more springy in the rear and I don't like that.

 

[bombero]

I have the same rig but when I installed the tembrens I had 1. 25 in between the axle and the overload. I can see from your pic that on a little rough road they will be hitting. Mine dont. Cant tell from the pic, do you have the spacer in? If you do take it out. Jim

 

[CUMMINZ]

I do not have a spacer in. I have about 5/8" space.