275 injector part #

[Mallory]

I went by an injector repair place in town today. Asked if they had any 275 injectors for a 2001 ram. They sold me bosch part# 0432193635. Is this the right injector for a 2001 with an auto trans? What tools will I need? Consumable parts? I paid 290 bucks for new injectors. Any help would be greatly appreciated.

 

[Big White Beast]

E-Mail me........

-- email address removed --



And I'll reply with the . PDF file for installing my DD2's. Injectors don't matter the instructions would be the same. A 19MM crows foot wrench makes it easier but can be done with some shorter wrenches. Other than a good set of tools (Or a not so good as long as you have the right sizes) and an inch pound torque wrench and your set.



Garrett

 

[mike65]

Yes thats the right part #, Thats the same number i put in my truck.





Mike

 

[Mallory]

Thanks for the help. I can't wait to get them in. I think I might spend a sick day away from work. brian mallory

 

[Royal]

Did you get new O rings and copper washers? A 3/4 in. crows foot is the same as 19mm. in case you don't know. Good luck.

 

[Big White Beast]

I forgot....

Don't forget the intake manifold gaskets. Mine were reuseable when I did the injectors but when I drilled and tapped my horn for the boost gauge it went bad. There are 2. $8 or so from the stealer, good insurance to have if you do it on a weekend.



Garrett