Engine/Transmission (1998.5 - 2002) 275 injector swap.

[KcoleKennyc]

I have a set of 275 injectors on order for my 98. 5 24 valve. In the service manual some special tools are used-are these necessary. I also would like to know if I need to buy anything else, such as seals, to install these?

 

[pro99]

Injectors can be installed within about 3 hours by most do it yourself enthusiasts. No special tools are required that can't be bought at most Sears or other auto stores. Some 1998 24 Valve trucks need connector tubes with these injectors, these trucks have an engine serial number below 56462591. Connector tubes are $85. 00.



call



TST Products, Inc. 7440 S International Dr Columbus, IN 47201 812-342-6741

 

[Okie-Go]

I don't know much about the tools needed but you'll sure like em once they are put in. Enjoy!

 

[BV]

injector tools

It would depend on what tools they think are required. The crows foot and torque wrenches are a must but you can make your own injector puller and I think a small screw driver is used to pull the tubes out.