Here I am

285's revisited please help

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Avoiding K&N problems

Rocker Panel Covers

Status
Not open for further replies.
Just wanted to thank all who responded to my plea for advice and here is what I did.
Wheels are 16x8 Eagle alloys series 1219, tires are Durango Radial A/T's 285x75R16 load range D (3305@65 p. s. i. ), sorry can't remember who makes the tire but they are built in the USA it's something like shimako or shimano? What seems odd is that my speedo is not off any from my 245's unless I checked wrong with the 245's and the speedo was off with them, I don't know. with the new tires and wheels the settup does stick out of the fender wells alittle bit but not bad, plus I kind of like it and the wheel wells are now filled up. After all of this bombing I have done #ad
I think I better find my bombitis medicine and stop for awhile.
Thanks to all,
Paul
. . but... then... their is 4 inch exhaust, psychotty air and..... #ad
#ad


------------------
'96 2500 ext. cab, LB, 4x4, 5 speed, 3. 54, TST 280 cam plate, AFC spring kit ,pyro and boost gauges mounted on A-Pillar, tinted windows, 16x8 Eagle alloys series 1219, 285/75R16 Durango A/T's

[This message has been edited by Flatlander (edited 06-13-2000). ]
 
Check out the Cooper Discoverer A/T 285/75R16 (9" tread width and 32. 85 tall). They are rated at 3305# Max. load. 50,000 mile tread life warranty. Come with white outline raise letters. Good lookin tire. I have had excellant performance with Cooper tires. I am going to put these on my truck next month. Cooper also makes a 305/70R16 with 2910# Max. load, 9. 8" tread with, and 32. 75" tall.

---------------------------------------------

99 White, Quad cab, 4x4, 5-sp, 3. 54's, Fully loaded, 58,000, Stainless Nerf Bars, Rhino Liner, Raven Cap, Pro-flap mud flaps, Stock motor, Power Edge in a month or two.

[This message has been edited by BIG BOB (edited 06-17-2000). ]

[This message has been edited by BIG BOB (edited 06-17-2000). ]
 
Status
Not open for further replies.
Back
Top