Here I am

2nd Gen Non-Engine/Transmission 2WD Lift ???

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

2nd Gen Non-Engine/Transmission Rear Wheel Cylinders

Status
Not open for further replies.
I would like to lift the front of my 2WD a little to get rid of some of the nosed-down look. I was thinking somewhere around 2 inches. Although, I don't want it to be a problem with alignments and steering and such. Anybody have any suggestions or if there is even a kit out there? Thanks
 
Same

Wondering about the same thing. i know they have spacers for the top of the springs in the front but then i have read that you could damage your shocks because they are not long enough. but that might be another one of them "TDR" Panic stories. :)
 
Thats strange... . i went to 4 wheel parts and they had a 3" lift and a 6" lift for my truck but claimed it required larger wheels and tires and that made it a grand total of almost 3000 bucks, est. if you look a there website though there is nothing there for it... .
 
2 inch lift

I have a set of 2 inch lift spacers for a . . dodge two weel drive. they are brand new. cost me 60. 00 bucks . I have a 4 weel drive bought these by mistake will sell them to you if you want. let me know
 
Status
Not open for further replies.
Back
Top