Here I am

3 guage pod search

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Suncoast Torque Converters

319 HP on G-TECH

Status
Not open for further replies.
Time for guages but haven't been able to find a 3 guage pod for my 98 12v. I went to a local diesel shop and they promised to produce one but haven't been able to. Do they exist? TST does't carry one and the two guage pod with the combo guage isn't going to work for me. Anybody?


------------------
98 qc, 4x4, slt laramie, 3:54 ls diff, 2YG pkg, Kelsey trailer brake control, dodge running boards, diamond plate bed rails, silencer ring wind chime on porch, Raven cab-hi camper shell, psychotty air system, T/C lock-up switch, guages next
 
<font color=blue>Dash or Pillar?

Dash mount look up Autometer. THey also list a three gauge pillar for a 98 Dodge.

Pillar I believe DIS will have some available soon, not positive.


I have the #15002 Dash Pod and am Extremely happy with how it looks and functions.

------------------
  • <font color=blue>
  • Eric D. Howard - #ad
    - BOMB'er! - #ad
    - TDR Member since April 8th, 2000
  • 2001 Dodge Ram 2500 HD 4x4 SLT Auto Reg cab Cummins Turbo Diesel 4. 10 gear ratio LT265/75R/16 tires
  • Patriot Blue Pearl Coat, Agate interior, Leather seats EVERY option, Silencer Ring AWOL, Trans Go Shift Kit
  • JRE 4" Exhaust, "Hot" PowerEdge, Autometer UltraLite Gauges (EGT, Custom Boost, transmission temp), K&N Airfilter</font>
<font size=-2>

[This message has been edited by KatDiesel (edited 08-13-2000). ]
 
KatDiesel, just was checking out the Autometer site when you replied. Yes, they do have a 3 guage pillar mount and remarkably, it's a 15002 as well. I would like to know what a good price is for one if you can email me.
Thanks, Steve.
 
Heetseeker_1, check out this thread: www.turbodieselregister.com/ubb//Forum3/HTML/001329.html ALL applicable part numbers and descriptions for the new Gauge Works (Autometer) FULL pillar replacement panels are listed within my thread. These should be available from D. I. S. at the end of the month. Brent (from D. I. S) assured me they would be getting pix of these on their website A. S. A. P. They will be the first to receive the four new (FULL) pillar panels for the '98 through '01 Rams.

D. I. S. can be reached at: 1-800-658-9355 7:00 AM - 5:00 PM Central/M-F.
www.dieselpage.com/apillar.htm

------------------
'98. 5 2500 QC 4x4 Sport, Glasstite Vision II, 285 BFG A/Ts on M/T Challengers, Warn 4X Boards, Mopar fender flares & tow hooks, NW Custom s/s-rubber mud flaps, Mag-Hytec diff. cover & trans. pan, Edelbrock IAS shocks, Reese Titan V hitch, VDO Vision gauges, Dynamat, '00 Sport grille & valve cover, '00 Sport headlights/PIAA Super White bulbs, PIAA Dual Sport 900 aux. lights, BD exh. brake and TorqLoc, Prime-Loc, Bosch 275s, VA CPC, DD Boost Module, Banks Stinger wastegate actuator, ATS exh. man. , Banks 4" dia. s/s exh. sys. , BD V10/Cummins hybrid TC & valve body, BD trans. front pump & PressureLoc, Air Bulldog induction hood (with NACA ducts), plus MANY other trick modifications

[This message has been edited by John (edited 08-14-2000). ]
 
Status
Not open for further replies.
Back
Top