3200 spring in 92 VE pump?

[CHolman]

I guess the place that sent me my 3200 spring forgot to put in the instructions and was wondering if anyone could possibably help me wih pics or whatever to help me through this... Also, where exactly is the fuel screw at, because I wanna turn it up a lil bit more while I'm at it... Thanks ahead of time.

 

[JGrefenstette]

go to the 1st gen FAQ's. pastor bob has it all layed out there, pics and everything. for the spring install and turning up the pump. also check out the thread in this forum, titled, "govenerspring... ... pandoras box??" we been through it in there too.

 

[DBraunig]

Turning up the pre 94 Ram diesel injector pump from Fritz's DodgeRam.org



Here is another with some detailed pics : Den - Dodge CTD 1st Gen - VE Governor Spring Install



Hope this helps,

Dave

 

[CHolman]

Okay now I'm idot, I can't remember how the fuel pin should face in the pump... Does the tapered end face forward, or does it face to the rear? I put it in facing forward and the best I could get was 10 lbs of boost. The truck is a dawg and I know I'm not getting the fuel I was, with boost being 28 lbs before... Thanks...

 

[TWorline]

Put the deepest part of the cone towards the front of the engine. #ad


This will give you the most fuel. After reading your post a little better you probably just need to turn your full power screw in some more, that will bring your power back.