37" toyo m/t's what do you guys think

[demojoe]

I would love to put these tires on my truck I am just woried how they ride and handle on the highway I will of course buy the e load rating I just dont want a tire that i will fight on the highway or is so loud you cant hear I know I will have to buy the glassworks fenders front and rear I know I have the susp. for the tires I may have a rub issue with the chase control arms which I am not worried about I am just worried the tires will not ride and handle properly on the highway and for daily driving please help me with my prob





Thanks for the help





I now run 34" nitto terra grapplers which I love just not tall enough

 

[EBung]

I have them on my 2nd gen and I wouldn't own any other tire now. You shouldn't have any rub at all unless you land with your wheels turned. I had to install 1/2" longer arms and stick with stock wheels. I also had to swap to 4. 10 gears cuz these tires are considerably fatter, taller and heavier than the 35 inch toyo m/ts. But now I am totally happy.

 

[testraub]

MMMMMMMMMMMMMMMMMM Toyo's SMooooooooooth and quieeeeeeeeeet

 

[Bob4x4]

The only downside I see running them is the increased risk of hard part failures because they hook so well. Noise is not an issue.



Bob

 

[demojoe]

thank you for the info guys it seems that everbody that runs the toyos love them I will give those a shot next just on the fence about the size do you like the 37's for the highway do the side walls roll under hard cornering

 

[Megadesertdiesel]

i would think you will see some tire roll when cornering. i just went from 35'sToyo MT) on 20" wheels and now 35's on 17" wheels(at 60psi) and noticed some tire roll when cornering and when swerving around trash on the freeway.



everyone is correct on the grip you will get from these tires. i run mine on the freeway and in the sand only and got 25k out of my tires. it just sucks that these tires are on the expensive side. be careful when you air down past 9psi in the front and get a little air under the tires, the side walls tend to split where the tred wraps around the sidewall. otherwise these tires are great and very quiet on the highway.

 

[WTBurke]

They ROCK... and balance up with less weight than my GoodYear MTR's



William

 

[demojoe]

I try to keep all four on the ground as much as possible I also never air down pasted 25 psi I am in the woods I wish I was in the sand I am just a little nervous going to such a big tire I come from the road race world 18 inch rims with 35 series rubber so for me going to a 37 " is huge anyone that knows me thinks I have gone crazy or something they cant believe I just pulled up in that truck the tallest tires I ever had where 31 " tall on my 1 ton duel wheel this is all just new and very cool to me I have to say I have never had this much fun offroad

 

[CumminsBu]

I have 35" with 4:10 gear and I think 37" would be better in the RPM department. But my tire rub my fenders with the 18 X 9 with 5" BS rims I'm using. I have the Kore lift also.

I going to go with longer control arms and 37" Toyo's after my Pro Comp ware out.

 

[demojoe]

I dont think the kore control arms are longer I have the chase arms I thought they were the same length i know the race hybrid arms are adjustable but they arm expensive

 

[Bob4x4]

The 37's give a bit more ground clearance to clear obsticles also





#ad




Bob

 

[firemansdiesel]

I dont think the kore control arms are longer I have the chase arms I thought they were the same length i know the race hybrid arms are adjustable but they arm expensive

Don Thuren makes adjustable control arms for $600...

 

[Bob4x4]

:-laf No need to adjust these stout babies,and they make the 37's fit well.

Dodge Lift Kit Components - Chromoly Control Arms

They are also available for 2nd gens now Oo.



Bob

 

[JCasper]

:-laf No need to adjust these stout babies,and they make the 37's fit well.

Dodge Lift Kit Components - Chromoly Control Arms

They are also available for 2nd gens now Oo.



Bob

About how much $$$$$$?



Do your 37's clear the control arms when using those even with your stock wheels?

 

[demojoe]

I think those are about $950 I have to say I have the carli rear full leafs I love them they are a very nice piece he has quality products those carli control arms look very much like the kore chase control arms I know the only ones that will not rub are the kore hybrid arms but they are $2500 which is to much for this kid maybe one of you guys can justify spending that much I cannot

 

[JCasper]

I think those are about $950 I have to say I have the carli rear full leafs I love them they are a very nice piece he has quality products those carli control arms look very much like the kore chase control arms I know the only ones that will not rub are the kore hybrid arms but they are $2500 which is to much for this kid maybe one of you guys can justify spending that much I cannot

I can't justify that either.

 

[Bob4x4]

Find pricing here

Carli Suspension :: Dodge Suspension Systems :: Suspension Kits & Parts :: Poly Performance Inc.



Bob

 

[Baja_Mike]

I think those are about $950 I have to say I have the carli rear full leafs I love them they are a very nice piece he has quality products those carli control arms look very much like the kore chase control arms I know the only ones that will not rub are the kore hybrid arms but they are $2500 which is to much for this kid maybe one of you guys can justify spending that much I cannot

The Carli off the shelf arms were ran on the Big Dog Performance race truck at the Baja 1000. The joints were perfect after the race. They could have ran the race 5 times over on the same set of arms. I don't think anyone else has actually run the Baja 1000 with their arms. Oo.

 

[demojoe]

I will be putting the 37's on today I cant wait

 

[Spooled-up]

Demojoe,



Any pics of your setup?