Engine/Transmission (1998.5 - 2002) 5.9l 24 valve timing gear housing guide pin

[stoney59]

Just talked to a repair shop owner about a 1999 2500 Dodge that had a catastrophic engine failure because pin (pressed in at factory) worked loose. Repair bill was close to $4,000. I also understand a after market fix (from Piers Diesel Research and others) is available for less than a $100. Does anyone have information about this problem? Or is it repair shop smoke and mirrors. I called several Dodge dealers and Cummins and got no help.



Thanks



I have a 1999 2500 Dodge I use to pull a trailor

 

[Pavemen]

search for 'KDP' (killer dowel pin). Its a fairly simple fix that you can do yourself with minimal tools. jsut time consuming. also, you dont need to buy a kit if you can source a bolt and fab a small plate. then buy the gaskets you need for the timing cover/housing.

 

[bigredblur]

Here is an explanation of it on this page. It's for a 12V engine but this info applies to the 24V also. This page explains how to fix it.

Ram Diesel KDP retainer