6in. stainless tips?

[caleb c.]

I am wanting to find a nice 6in tip for the 5in exhaust I am putting on. Anybody know where to look?The only one I found so far was at www.shopdiesel.com . I want stainless so I don't have to worry about rust. Thanks

 

[nfox]

6" SS Tip

I got mine from magnaflo, i show some pictures but i don't have a digital camera. sorry!!

 

[24V-DSL]

http://www.protintnw.com/sa_dodge-exh.htm

 

[Bob Wagner]

Rip has a very good selection



http://www.protintnw.com/sa_dodge-exh.htm





and check Geno's too



http://www.genosgarage.com

 

[Hammer]

I am thinking he is looking for the same tip I am and not a straight 5" stainless tip. The trick is where do you find a stainless rolled tip 5" to 6" stainless tip. Answer,none are made with a direct bolt on application like the ones made that go from 4" to 5". You can buy a tip which Magnaflow has now come out with thats bolt on fit from 4'and expands in steps to 6",cut it off at the 5" expansion and then weld or hope you can get a bandclamp to hold it. Personally the welds end up looking like crap after time and trying to hide a band clamp under a 4x4 is a pain and looks like crap. When you show a truck you want a clean smooth installation so you don't loose any judging points. Its a shame that these exhaust companies now can not make a better selection for the 5" exhaust guys. With the poor selection of tips for us I'd imagine the 6" guys are pulling their hair out. Maybe someday... ... ... . Andy

 

[Mark Craig]

Hammer,



Should have some in approx 1 week. They are T-304 stainless and are designed for a 4 inch or 5 inch inlet with a 6 inch size from there out. They are clamp on with a built in bolt style clamp liek our 4 to 5 inch tips. Check our site to see what the 4 to 5 inch are like and the 5 to 6 inch are the same. They are angle cut rolled edge and pretty reasonable too!



Mark @ DPPI

 

[Hammer]

Mark. .

I know you rmember my ride from Muncie and know how fickle I am with it being clean and nice,LOL. I will wait until when Proram gets back from visiting you this week and comes home from Louisville and have him get one from you for me. Thanks for the help Mark its nice to know we have companies which have such great support... . Andy

 

[Mark Craig]

Hammer,



Excellent, let me know your thoughts when you get it.



Mark @ DPPI