'93 Ingnition Connector/Harness

[BHerring]

Greetings All.

I am looking for a new connector/pigtail/harness for my ingnition switch. Does anybody know where I can get these items, just really need the plastic connector with some new crip on connectors, however a pig tail would work just fine or even a used harness that is good shape. Any and all information will be greatly appreciated.

Regards,
BH

 

[BigPapa]

I have not called a Dodge dealer, but I did not find it available at any auto parts dealers I deal with.

 

[BHerring]

I have not called a Dodge dealer, but I did not find it available at any auto parts dealers I deal with.

Thanks for looking BigPapa!!!!! I just shot Painless Wiring an email to see if they have one.

 

[Bob4x4]

I would try contacting mysteryman by pm he has a ton of 1st gen parts

 

[Bob4x4]

Also remember the tilt columes are a GM design and many parts are interchangeable

 

[BHerring]

Also remember the tilt columes are a GM design and many parts are interchangeable

I though I saw some blank plastic connectors that where GM but looked as if it would fit, but Painless Wireing told me nope those wont work....go figure....Might just solder the wires to the ign swith then make my own connector with bailing wire and duct tape. hahahha...I will give the "mystery man" an email to ask.

Thanks
BH

 

[DVolk]

LMC might have what your looking for