2nd Gen Non-Engine/Transmission 95 dodge trailer brake control install

[DPyles]

I am trying to put a trailer brake controller on my 95 and I need to know the wire I need to tap into on the brake pedal switch.

I know that there is supposd to be a connector on the steering column to plug into but My truck was built late 94 And I understand that there is no plug on the early trucks.

Lucky me!!!!

I can get the rest of it figured out I just need to know the correct wire to get a hold of on the brake pedal.

Thanks loads.

Dan.

 

[Joe G.]

It's a big blue one under the dash to the left in a bunch of wires. It is just clipped off so you can't mistake it. You may have to rummage around a bit to find it.

 

[Prostock]

Or use your test light and find which one that comes off off the brake light switch.