2nd Gen Non-Engine/Transmission 96 Dodge 3500 driving/fog lights??

[JWaters]

I got all my stuff for the fog lights (275. 00) and now the plug has one pin in the wrong location. Has any one seen this? My truck did not come with fog lights but I found what looks like the plug behind the radio for the lights. I just have 1 pin stopping me from plugging it in. look at the pictures you can see what I am talking about.



-

-

-

-

 

[FLynes]

WJ,



Did you get the wiring harness for the fog lights? I did this add-on to my 1997, and I hunted far and wide for a harness... mine didn't come with the wiring for the fog lights. I finally found one in Houston, at a Dodge Dealership, but I was told that Mopar no longer makes that harness. If you can find it, it should be plug-n-play.

 

[JWaters]

no I dont have the harness but the truck sems to have it alredy, Under the front has the plugs and in the dash I found this plug that looks just like it except one pin in wrong place.

 

[FLynes]

That's the wrong plug... . I had that one too... not sure what it goes to, but you have to get the entire Mopar wiring harness, from the engine compartment to the fog light button. Like I said, Mopar no longer makes that harness, so you have to hunt down every single Mopar dealer to see if they have it in stock (I forget the part number). Good luck to you.

 

[JWaters]

sheet that sucks, I have over 270 dopallrs in this all ready, now I have to find a harness, ANY ONE OUT THERE HAVE ONE???? How about a harness part number???? Wrecked Trucks with fog lights???





HELP!!!!!!!

 

[WOTURBO]

I Don't Know If This Helps But I Notice My 95 Truck Had The Same Plug Prolblem But I Was Thinking Is That Plug For The Automatic O/d Switch? My Truck Is A 5sp, I Don't Have The Newer Fuse Panel Under The Hood Like The 96 And Later, I'm Installing Foglights Out Of A 96 Truck. I Got All The Parts For The Wrecking Yard The Even Cut Off The Foglight Switch Connector And Left Me About 8 In. Of Wire To Use.