Here I am

2nd Gen Non-Engine/Transmission 96 Ram 2500 5.9 needs cruise control vacuum actuator

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Engine/Transmission (1998.5 - 2002) Lift pump pressure swing on 98.5.

2nd Gen Non-Engine/Transmission clunk in steering column

Status
Not open for further replies.
My battery leaked and ruined the cruise control actuator mounted under the battery box. Does anyone have a good source for Dodge parts without going to the dealer? My local dealer is loco! Everything they sell is at 50% above marked up retail. Anyone know of a reliable source? Thanks!
 
Good Source

They did not have the cruise control vacuum actuator but they got a lot of parts for down the road. Good source! Thanks.
 
mine got doused by the battery too and crapped out but i was able to jb weld up the holes in the casing and it has been good for 3+ years now
 
Thanks for the help!

You were right, $62. 50 took care of it and it should be be herre next week. Should be an easy fix. The JB Weld would probably work, but, I have several small holes to try to seal up. Thanks for all the help! This is why all Dodge Truck owners need to be TDR members.
 
Status
Not open for further replies.
Back
Top